C5R XP-2
Casagrande C5R XP-2 is a highly manoeverable hydraulic crawler drill rig for foundation, anchors, micropiles and jet grouting.-
111 kW
Engine Power
-
50 kN
Extraction Force
-
10 T
Operating Weight

- about
- technical
- options
INTRODUCTION
The new Casagrande C5R XP-2 is a compact multipurpose hydraulic crawler drill rig for foundation, anchors, micropiles and jet grouting. Equipped with a separable power pack, a modular mast and a double joint kinematic. Small, easy to manoeuvre and track thanks to the ergonomic remote control and can work in narrow spaces such as tunnels or inside buildings.
The SPM – Smart Power Management – and the full load sensing hydraulic system allow an intelligent engine power management to improve performance of the machinery and reduce fuel consumption.
PERFORMANCE AND PRODUCTIVITY
Technical Data |
|
---|---|
Engine power | 97 kW |
Width of crawler | 1200 ÷ 1600 mm |
MAST |
|
Stroke of rotary head | 2150 ÷ 4050 mm |
Extraction force | 60 kN |
Crowd force | 60 kN |
CLAMPS |
|
Diameters | 89 ÷ 406 mm |
ROTARY HEAD |
|
Torque | 17000 Nm |
Max. Drilling speed | 132 rpm |
WEIGHT |
|
Weight in working condition | 10000 kg |
Double Joint Kinematic
The heart of motions is therefore the joint system, studied to support all the stresses and to be operated within the most demanding conditions. Thanks to its double joints system and a boom zoom with 350 mm of stroke, the C5R XP-2 is a fast and rapid machine to operate, easy to use. Total fl exibility is the key word. The new joints system of the C5R XP-2 allows reaching the most extreme spots and can easily work in narrow spaces such as tunnels or inside buildings.
Optional Equipment
-
- Removable power pack with electric motor 75 kW
- Other rotary heads available
- Drifter T40 (Back Device)
- Rotary head side movement
- Rotary head double feed speed
- Balancing kit – crowd/drilling feed
- Auxiliary winch with rope Max line pull 900 kg
- Cathead for auxiliary winch
- Flushing pump-Water pump: GAMMA 62 (60 l/min max – 50 bar max) GAMMA 202 (200 l/min max – 60 bar max)
- Pump CC30/20S Foam: (30 l/min max – 50 bar max) High pressure: (30 l/min max – 200 bar max)
- Mud pump NG 530 L (170 l/min max – 24 bar max)
- Lubricator for down-the-hole hammer 8,5 l
- Electric fuel pump
- Cable remote control for tracking
- Radio remote control for tracking
- Additional sound proofing baffles
- Safeguards according to EN 16228
- Casagrande FleetMaster remote rig control and monitoring via internet